RepStrap.dk
(Move to ...)
Home
▼
Saturday 10 April 2021
An ads experiment
›
I'm tired of seeing totally irrelevant ads. It seems that the art of figuring out what a web page is about as a basis for selecting ads...
1 comment:
Wednesday 24 February 2021
Dehumidifying methods
›
I've had the worst time with my PETG filament, test prints literally exploding during the print and finished prints being very brittle. ...
4 comments:
Saturday 30 January 2021
Tests of magic numbers, part 1
›
There's some talk about "magic numbers" in 3D printing, the idea being that the Z stepper motors are more precise when aligne...
Sunday 24 January 2021
A UniCoFil vase
›
Back in August, I did some more prints with the UniCoFil filament after replacing the heatbreak. It's possible that replacement wasn'...
Sunday 26 July 2020
Replace *all* the things!
›
As mention last time, I had been trying out the UniCoFil filament, first the light blue, then the fast-changing rainbow. All through that, I...
Sunday 5 July 2020
Stripped again, and out of tubes
›
I was trying out some semi-transparent blue filament from UniCoFil. The temperature tower had quite a bit of stringing, so I tried with 2mm ...
Monday 29 June 2020
Hey, Slab!
›
Today, I decided it was time to reduce the noise of my printer. First I did some measurements. I created a single-layer print of pure infill...
›
Home
View web version