While I'm trying to get things done, here's some things I'd like to do once the RepStrap is actually working:
Electronics organizing cabinet thingy.
Resistor lead shaping tool.
My work yesterday was trying to put the frame together. It was foiled by 1) The narrowness of the rails made it really hard to turn the bolts, instead I should enlarge the holes slightly to allow the bolt to be thrust through, and 2) the holder for the moving rod was a different size than the layout used, I'll have to redrill.
Showing posts with label ideas. Show all posts
Showing posts with label ideas. Show all posts
Tuesday, 23 June 2009
Subscribe to:
Posts (Atom)
-
I've had the worst time with my PETG filament, test prints literally exploding during the print and finished prints being very brittle. ... -
Trying to get things to work on my iMac. On Tim's advice, trying out Lulzbot Cura, and it does seem nicer, including pretty much all the...
-
After +Tim Hatch 's suggestion started making more and more sense, I re-soldered the Z and E microstepper jumpers. After that, it's...
