Just goes to show that each filament has its own best settings.
Showing posts with label vase. Show all posts
Showing posts with label vase. Show all posts
Sunday, 24 January 2021
A UniCoFil vase
Back in August, I did some more prints with the UniCoFil filament after replacing the heatbreak. It's possible that replacement wasn't necessary, but I will never know. Even after that, the stripping continued, though possibly not as often or as much. After printing out a failed hexagon vase that simply came apart at a layer that had stripped, I changed the filament settings to a) have a 1.0 extrusion multiplier, and b) extrude at 230°C. That eliminated the stripping, and I was able to print this nice small vase:
Subscribe to:
Posts (Atom)
-
I've had the worst time with my PETG filament, test prints literally exploding during the print and finished prints being very brittle. ... -
Trying to get things to work on my iMac. On Tim's advice, trying out Lulzbot Cura, and it does seem nicer, including pretty much all the...
-
After +Tim Hatch 's suggestion started making more and more sense, I re-soldered the Z and E microstepper jumpers. After that, it's...
